Graco Rac X Low Pressure Spray Tips

Graco Low Pressure Spray Tips Handle Fine Finishes to High Production Applications

According to Graco, painters have seen a lot of success with 2017’s Fine Finish Low Pressure FF LP Tip. But why stop there? Graco has built on that model with the Rac X Low Pressure Spray Tips which they’ve designed to deliver what they call “the industry’s best finish at low airless spray pressure.” The result, they claim, is less overspray and better pattern overlap for consistent blended finish quality with complete atomization.


Graco Low Pressure Spray Tips: The Big Deal

The Rac X FF LP and Rac X LP come in 46 Low Pressure Tip sizes to support the widest range of applications, from detailed trim work to large surface and high production applications. The secret is in the SmartTip technology, an internal tip geometry that works best at low airless spray pressure. This tip design reduces the energy required to atomize paints, stains, and other materials to deliver a consistent finish.


The Graco Low Pressure Spray Tips work with any airless sprayer, spraying at up to 50% lower pressure. This results in less overspray and easy pattern overlap. The soft spray fan pattern makes it easy to apply any material to any surface.

Graco also claims that these tips reduce your prep work and clean-up and that they last up to twice as long.

For even better results, Graco recommends using the Rac X FF LP and Rac X LP Low Pressure Spray Tips with their SmartControl Pressure Management System. This setup ensures a superior spray fan pattern without fluctuations in pressure at any setting.

For more information about Graco RacX Low Pressure Spray Tips and airless low pressure sprayers, check out Graco by clicking here.

Graco Low Pressure Spray Tip Prices

You can pick up the Rac X FF LP and Rac X LP tips at your local Graco dealership, or online. Though sizes and prices vary we found a large assortment of them on Amazon for around $35 a piece.

Graco Low Pressure Spray Tips Size Charts

  • Rac X Fine Finish Low Pressure Switchtips (FFLPXXX)
In (mm) 0.008 0.010 0.012 0.014 0.016
2-4 (51-102) 108 110 112
4-6 (102-152) 208 210 212 214
6-8 (152-203) 308 310 312 314
8-10 (203-254) 410 412 414
10-12 (254-305) 510 512 514 516
12-14 (305-356) 616
Flow Rate (gpm) 0.07 0.11 0.15 0.21 0.27
Flow Rate (lpm) 0.26 0.41 0.59 0.80 1.04
Flow Rates calculated with water @2000 psi, 138 bar, 13.8 MPa – paints with a higher viscosity will decrease the flow rate. For example: for a tip with a .010 orifice and an 8 in. pattern, order the FFLP410
  • Rac X Low Pressure SwitchTips (LPXXX)
In (mm) 0.013 0.015 0.017 0.019 0.021 0.023 0.025 0.027 0.029 0.031
6-8 (152-203) 313 315
8-10 (203-254) 415 417 419 421 423 425
10-12 (254-305) 515 517 519 521 523 525 527
12-14 (305-356) 617 619 621 623 625 627 629 631
14-16 (356-406) 723 725 729 731
Flow Rate (gpm) 0.18 0.24 0.31 0.38 0.47 0.57 0.67 0.77 0.90 1.03
Flow Rate (lpm) 0.69 0.91 1.17 1.47 1.79 2.15 2.54 2.96 3.42 3.90
Flow Rates calculated with water @2000 psi, 138 bar, 13.8 MPa – paints with a higher viscosity will decrease the flow rate. For example: for a tip with a .021 orifice and an 8 in. pattern, order the LP421

We will be happy to hear your thoughts

Leave a reply

ToolKit
Logo
Enable registration in settings - general
Compare items
  • Total (0)
Compare
0