$109.99 - $82.99
(as of Feb 27,2021 09:21:35 UTC – Details)
1. Selected Material: The BBKANG tools kit uses light and reliable alloy, easy to use, strong, and safe.
2. Pro Puller Tabs: 24 different size high durability glue tabs suit for different dent shapes.
3. Pro Glue Kit: 5 yellow and 5 black environmental glue sticks with a 100W hot glue gun, fast melt and strong bonding.
4. Tap Down Pen: 9 different heads for different shapes, works great with tiny bulge or dent marks.
1 x Dent Lifter.
1 x Bridge Puller + 5 Bridge Tabs.
1 x T Puller.
1 x Rubber Hammer.
5 x Yellow Glues.
5 x Black Glues.
1 x Tap Down Pen + 9 Heads.
24 x Puller Tabs.
1 x Shovel.
1 x Alcohol Bottle.
1 x Dishcloth.
1 x Manual.
1 x Tool Bag.
1. Clean the dent surface with a clean wet cloth.
2. Insert a glue stick into the glue gun, connect the glue gun to a power source and pull the trigger for about 5mins to preheat the glue.
3. Select a suitable tab for the dent mark, (Note: The larger the tab is, the bigger drawing force could been taken.) Use the glue gun apply enough glues on the tab, then immediately place the tab in the center of the dent while the glue is still hot and melting.
4. Hold the tab till it sticks, then wait the glue cool down, normally takes 5-8mins, even shorter in winter.
5. Use the lifter/ puller to pull the tab till the dent have risen up.
6. Clear the glue by alcohol with plastic shovel, clean the surface.
7. Repeat above steps with smaller tab till the dent had been removed.
8. Use hammer and tap down tool set slightly modify the surface to make it looks better.
BBKANG ‘B62L’ Dent Lifter
The dent lifter ‘B62L’ is made of strong alloy, which can certainly support any normal range pressure with a light weight. The new design increased spaces between two ‘legs’, so it could lift larger dent than the old version. Also, ‘B62L’ have longer arm, which will cost less force to supply same lift force on tabs.
‘B62L’ inherit the perfect design on the top spin knob. You can adjust the height of the tab buckle by simply spinning the top knob.
BBKANG ‘B61B’ Bridge Puller
Compare to dent lifter, bridge puller would hold larger size dents, since the distance between two legs are longer.
‘B61B’ uses light strong alloy as the bridge body instead of plastic or hollow pipes, which will hold much larger tension and torque while pulling, and ensure your safety. The foot designed two wide angle rotatable pedal to make sure our product can work on different shape surface.
BBKANG ‘B63P’ Dent Puller with Slide Hammer
The Dent Puller ‘B63P’ is made of selected strong alloy, 100% reliable in daily use. It was constructed by a short T puller, and an extend slide hammer bar. It can deal with different sizes dent. We’ve increased the weight of the hammer to make this tool more efficient, and the bar bad been well treated and polished to make the hammer can slide more smoothly.
All BBkang tools are made of selected material to ensure the strength, and we concentrate on details all the time, to make every product a reliable tool. Also we are always trying to improve the design to make our product could take different challenge.
The package include a 100W hot glue gun, 5 yellow glue sticks and 5 black glue sticks. 100W glue gun melt glue sticks much faster and could prevent curding. Black glues had more bonding force than yellow glues, and won’t melt by it self in package.
Not only suitable for car body dents, but also for any other metal surfaces in your daily life, such like refrigerator, BBQ furnance. Wherever you had a metal dent, have a try with BBKANG pro kit, always surprised you. remember to use black glues.
After you pull up a dent, you might have a very light tiny bulge left if you pulled too hard. A tap down tool is the best tool to fix small bulges. We supply 9 different tool heads, which works properly on different dent shapes and different surface material.
🔨 Widely Used —- Would take care of the different shape and different size dent marks with 24 pro tabs in the kit. Work properly on hail damage, door ding, motorcycle, refrigerator, washing machine, etc. Saving time, saving money.
🔨 Reliable Quality —- The material of dent removal tools are selected to avoid any safety threat. They won’t break when taking a normal range of pressure. All products have passed strict quality control before shipping out of the factory.
🔨 Paint Friendly —- Never harm your car paint, no toxic chemicals are included. The glue will easy to remove after you spray alcohol on it. Remember to clean the paint before pasting. (Note: aging car paint might fall off by any pressure).
🔨 Easy Manipulate —- Paintless dent repair kit’s design is very easy to understand and manipulate. Work with this kit should be able to do the job fast and smoothly. Also, you can contact us if there is any question, we are always stand by.
🔨 Easy Storage —- A quality tool bag comes as a gift. The tools kit is constructed by several different tools and lots of small pieces, a tool bag would help to stock the tools kit better and make sure no small pieces got lost.