(as of Feb 23,2021 20:14:26 UTC – Details)
Apexstone 100N/22.5lb Gas Struts,Gas Springs,Gas Strut,Lift Support,Gas Shocks,Lid Stay,Lid Support,Set of 4
Suitable Gas Strut for the Kitchen Cabinets
Do you want to make your sideboard lifted top up and it stays in place until you pull it down ?
Are you looking for the suitable gas strut for your Kitchen Cabinets ?
Look at this, It is so nice for you to be able to use both hands inside the cabinets without balancing the cabinet door on you head
Suitable Gas Strut for RV Overhead Cabinet Doors
Do you have to hold the doors open with your head or have to have my husband/wife hold the door open while you get stuff out ?
Are you looking for the suitable gas strut for your RV overhead cabinet doors ?
Here’s it, because once you open the doors with these struts on, they stay open until you physically close them
CUSTOMERS’ SHOW TIME
Excellent strut! Exactly what I needed to support an overhead cabinet door. The door was about 28″ wide and 14″ high over a microwave. One strut held it up but I used 2 for balance. Good instructions easy install. Made my day!!
Worked great for my application and the quality seems like they
Arrived quick with prime and on sunday to boot. Worked great for my application and the quality seems like they will hold up over time. Will be buying more soon
Great value, works as promised
Great value, works as promised. I used these to hold the lid of a coffee table/chest. Installation is a breeze and the directions were easy to follow, take note that measurements are metric so you can convert them with a smartphone or use a metric ruler.
Great product for the money
Did the job nicely. I wanted a self-opening and stay-open lid on the nest box on my chicken coop so my 3 year old could open it and not worry about it slamming down on her head or fingers as she reached in. Success! The lid on my nest box is 14″ x 30″, framed in 2×2 lumber, with sheathing, tar paper, drip edge, and shingles on it, so it’s relatively heavy. Just one strut was able to hold it open, but self-opening was non-existent and it still slammed shut quite hard
HOW TO INSTALL APEXSTONE 100N/22.5LB GAS STRUTS?
1.Determine the center position of the rectangle mounting hardware ,it should be 70 mm/2 3/4 inch from the back of the lid (do this bracket last so you can line up the closer with the side of the cabinet),as distance to the side of the lid, it depends on the thickness of your box/kitchen cabinets,then mark A ,drill 2 holes on the sides of the center point A
2.Determine the center position of the round mounting hardware, it should be 240 mm/9 7/16 inch from the back of the cabinet, and 10 mm/2/5 inch from the top of the cabinet ,then mark B ,drill 3 holes around the center point B
3.Fix the connectors and connect the joints and the strut
Lids soft open gently,Ideal for supporting the lid to keep it open.NOT SOFT CLOSE!
Pressure:100N/22.5lb (Per Strut);Length ( hole center to hole center) :9-11/16”;Travel:3-14/25” ,Distance between ball mounts compressed: 6-1/8″
Support opens lids to a maximum angle of 100 degrees.Available working temperature :-10℃~50℃/14℉-122℉
Package included: 4 X 100N 10 Inch Gas Strut and 20 X Screws
We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT OPEN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return